See also
Please refer to the following section for the procedure to create language-dependent text:
Creating OEM texts (Page 182)
12.2.13
Assignment of magazines to channels
Requirement
Turning technology has been set: Name of the associated configuration file
sltmturninglistconfig.xml.
Assignment between magazine and channel
With this setting, magazines can be assigned to channels. This makes sense if the machine
is configured so that several channels are assigned to one tool area (TOA area). If each
magazine is then only used in one channel, here it is possible to specify this assignment
between the magazine and channel.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Tool management
12.2 Configuring the user interface
171