General settings
6.9 Access levels
There are access levels 1 to 7 (see table below); where
● 1 is the highest and
● 7 is the lowest level.
Table 6- 1
Access level
1
2
3
4
5
6
7
6.9.2
Modifying the access levels password
Overview
You can activate the access levels protected with passwords from the user interface.
The following options are available for editing the passwords:
● Set new password
● Change password
● Delete password
Setting the password
58
Access level concept
Protected by
Password: SUNRISE (default value)
Password: EVENING (default value)
Password: CUSTOMER (default value)
Keyswitch 3
Keyswitch 2
Keyswitch 1
Keyswitch 0
1.
Select the "Start-up" operating area.
2.
Press the "Password" softkey.
3.
Press the "Set password" softkey.
The "Set Password" window opens.
4.
Enter one of the possible default passwords and press the "OK"
softkey to confirm the entry.
A permissible password is set and the valid access level is
displayed. Invalid passwords will be rejected.
Area
Manufacturer
Service
User
Programmer, machine setter
Qualified operator
Trained operator
Semi-skilled operator
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)