Siemens SINUMERIK 840D sl Commissioning Manual page 493

MD24110 $MC_TRAFO_AXES_IN_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24900 $MC_TRANSMIT_ROT_AX_OFFSET_1
= 0
MD24905 $MC_TRANSMIT_ROT_AX_FRAME_1
= 2
MD24910 $MC_TRANSMIT_ROT_SIGN_IS_PLUS_1
= 0
MD24911 $MC_TRANSMIT_POLE_SIDE_FIX_1
= 1
MD24920 $MC_TRANSMIT_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
References
Additional information on face end machining is provided in:
Function Manual, Extended Functions; Kinematic Transformation (M1): TRANSMIT
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Perpendicular to the rotary axis XC
Rotary axis C1
Parallel to the rotary axis ZC
1. channel axis X
2. channel axis Y
3. channel axis Z
Offset of the rotary axis for the 1st TRANSMIT transformation.
Axial offset of the rotary axis is taken into account during TRANSMIT 1.
Sign of the rotary axis for the 1st TRANSMIT transformation.
Limitation of working range in front of / behind the pole, 1st TRANSMIT.
Configuring cycles
Axis assignment for the 1st
transformation in the channel.
Assignment of the geometry axes to
channel axes for transformation 1.
Vector of the basis tool for the 1st
TRANSMIT transformation.
22.5 Turning
487