Siemens SINUMERIK 840D sl Commissioning Manual page 848

Configuring the system
2.5 Description of the actions
2.5.15 Show
Description
Syntax:
Alternative names:
Authorization level:
In the "sc show" command, various displays are grouped together showing the status of the
system.
show ip
Syntax:
Authorization level:
This command displays the IP address data of network interfaces. You have the option to
enter a specific interface. If no particular interface is specified, the data for all existing
interfaces is displayed, as well as the Default Gateway.
Example:
sc show ip
X120 (system network, eth0):
MAC=08:00:06:73:55:fd
X130 (company network, eth1):
MAC=08:00:06:73:55:fe
X127 (engineering network, ibn0):
MAC=08:00:06:73:55:ff
Default gateway: 111.222.333.1 (via eth1)
Used nameserver: 127.0.0.1
Used DNS suffix: test.siemens.de local
52
configured: (default)
current : IP=192.168.214.1 Netmask=255.255.255.0
DNS Name : ncu1.local
Nameserver: 127.0.0.1
DNS suffix: local
DHCP : synced server, prio=high, active
Statistics: RX=0.0MB (0.00% errors), TX=0.2MB (0.00% errors)
configured: DHCP
current : IP=111.222.333.64 Netmask=255.255.248.0
DNS Name : name.test.siemens.de
Nameserver: 111.222.333.12 111.222.333.13 111.222.333.14
DNS suffix: test.siemens.de
DHCP : client (server: 111.222.333.221)
Statistics: RX=1.2MB (0.00% errors), TX=0.0MB (0.00% errors)
current : IP=192.168.215.1 Netmask=255.255.255.224
DNS Name : ncu-ibn
DHCP : server
Statistics: RX=0.0MB (0.00% errors), TX=0.0MB (0.00% errors)
sc show ip [-INTERFACE]
----
none
sc show ip [-INTERFACE]
none
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
NCU operating system (IM7)