18.3
System utilization
For the NC areas you can display the system resources (utilization display) currently being
used:
● Runtime for the position controller, interpolator and pre-processing are displayed
● Time required for synchronized actions
● Position controller and interpolator NC load
● Interpolator buffer level
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Machine manufacturer
Please observe the machine manufacturer's data for the display of the time required
for synchronized actions.
1.
Select the "Diagnostics" operating area.
2.
Press the menu forward key.
New horizontal softkeys are displayed.
3.
Press the "System utilization" softkey.
The "System Utilization" window appears.
You can track the dynamic utilization display.
4.
Press the "Stop" softkey to stop the display update.
5.
Press the "Start" softkey to refresh the values.
Service and diagnostics
18.3 System utilization
325