Service Drive - Siemens SINUMERIK 840D sl Commissioning Manual

18.2.4

Service drive

Display drive and motor data
The "Service Drive" window displays important information about the status of the motors
and drive modules, such as motor temperature and DC-link voltage.
Procedure
18.2.5 Service drive: Parameters
Overview
The individual status displays, warnings, messages, etc. that are displayed in the "Service
Drive" window are explained in the following.
Further information about the interface signals can be found in the following documentation:
Function Manual, Basic Functions (A2, Z1)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Select the "Diagnostics" operating area.
2. Press the menu forward key.
A switch is made to a new softkey bar.
3. Press the "Axis diagnostics" softkey.
The "Service Overview" window opens.
4. Press the "Service drive" softkey.
The "Service Drive" window opens.
5. Press the "Drive +" or "Drive -" softkey to scroll forward or backward.
- OR -
Press the "Drive selection" softkey.
The "Drive Direct Selection:" window opens.
Select the desired drive directly from the selection list.
6. Confirm the selection with "OK."
The drive data is displayed.
Service and diagnostics
18.2 Displaying the Service overview
317