Manufacturer And User Cycle Cust_Meacyc.spf - Siemens SINUMERIK 840D sl Commissioning Manual

Bit 14
Bit 15
Bit 16
Bit 17
Bit 18
Bit 19
22.8.2

Manufacturer and user cycle CUST_MEACYC.SPF

Function
The CUST_MEACYC.SPF is part of the measuring cycle functionality. It is called in every
measuring cycle before and after executing the measurement task. The
CUST_MEACYC.SPF acts in the same way when measuring in the JOG mode and
measuring in the AUTOMATIC mode.
You can use the CUST_MEACYC.SPF to program and execute sequences that are
necessary before and/or after a measurement (e.g. activating/deactivating a probe).
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Coupling the spindle alignment with coordinate rotation around the infeed axis, for
workpiece measurement with multiprobe in the JOG mode
Workpiece measurement calibration in the bore with known or unknown center point,
measuring in JOG
Collision monitoring for tool measurement
For tool measurement, number of repeat measurements if the probe does not switch
Measuring feed rate for tool measurement
Retraction velocity from the measuring point for tool measurement
Configuring cycles
22.8 Measuring cycles and functions
535