Siemens SINUMERIK 840D sl Commissioning Manual page 784

Reference lists
A.1 Lists of start softkeys
A.1.2 List of start softkeys for milling
Program operating area when milling
HSK1 HSK2
Edit Drilling
HSK9 HSK10
-- Straight-line
circle
(only for
ShopMill)
Milling
The following tables list the possible start softkeys for milling technology. Assignments of
individual start softkeys can differ depending on the particular system. The specified OEM
softkeys are permitted for "Run MyScreens".
programGUIDE (G-Code) start softkeys:
Drilling
HSK2
VSK1 Centering
VSK2 Drilling
reaming
VSK3 Deep-hole
drilling
VSK4 Boring
VSK5 Thread
VSK6 OEM
VSK7 Positions
VSK8 Repeat
position.
166
HSK3 HSK4
Milling Contour
milling
HSK11 HSK12
-- --
Milling Contour milling
HSK3 HSK4
Face milling Contour
Pocket Path
Multi-edge Predrilling
spigot
Groove Pocket
Thread Pocket res.
milling mat.
Engraving Spigot
OEM Spigot res.
mat.
-- >>
HSK5 HSK6
Turning Miscellaneou
(only for G s
code)
HSK13 HSK14
Measure Measure tool
workpiece
Turning
HSK5
-- Stock Contour
removal
-- Groove Stock
removal
-- Undercut Stock
removal
residual
material
-- Thread Grooving
-- Parting Grooving
residual
material
-- -- Plunge-
turning
OEM OEM Plunge
turning
residual
material
<< Contour <<
turning
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
HSK7 HSK8
Simulation NC select
HSK15 HSK16
OEM --
Miscellaneous
HSK6
Settings --
Swivel plane Parallel
axes
Swivel tool --
High speed --
settings
-- --
Subprogram --
-- OEM
>> <<