Siemens SINUMERIK 840D sl Commissioning Manual page 949

2.3.4 Starting OEM programs
Overview
You can start OEM programs directly before starting the HMI system software. This requires
these programs (or their links) to be stored in subdirectories of the directory C:\RunOEM.
Starting sequence
The subdirectories are executed in the order listed. The programs within a subdirectory are
started in the chronological order in which they were placed in the subdirectory.
● Programs in the C:\RunOEM\SeqOnce subdirectory are started once and sequentially,
● Programs in the C:\RunOEM\Seq subdirectory are started sequentially whenever the
● Programs in the C:\RunOEM\ParOnce subdirectory are started once and simultaneously.
● Programs in the C:\RunOEM\Par subdirectory are started simultaneously whenever the
Not only program files, but also other types of file can be stored in the subdirectories, which
are then opened in accordance with their file type.
For example, ".txt" files are opened using Notepad, ".htm" files are opened using Internet
Explorer.
2.3.5 Starting applications in service mode
Starting other applications
If other applications are to be started in service mode, enter them with their complete path in
the [OEMRun] section in the file WINBOM.INI:
Example: Starting the "Notepad" program
[OEMRunOnce]
"Start WinVnc", "x:\I386\system32\StartWinVnc.exe"
"Check Password","x:\I386\system32\CheckPEPwd.exe"
[OEMRun]
"Start Backup/Restore", "x:\I386\system32\GhostOrder.exe"
"notepad","e:\windows\notepad.exe"
All other entries must not be changed.
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0
i.e., a program is not started until the previously started program is completed.
system is ramped up, i.e., a program is not started until the previously started program is
completed.
They run parallel with the HMI system software.
system is ramped up. They run parallel with the HMI system software.
Configuring the system
2.3 Customized settings during boot up
55