Table of Contents
Advertisement
1G-13 Fuel System:
Fuel Tank Inlet Valve Removal and Installation
WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk or fire
and personal injury.
Removal
1) Remove fuel tank referring to "Fuel Tank Removal
and Installation".
2) Remove fuel tank inlet valve (1) using flat head rod
(2) or the like.
CAUTION
!
Be careful not to damage fuel tank inlet valve
(1) with flat head rod (2) or the like.
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel tank referring to "Fuel Tank Removal and
Installation".
Fuel Tank Inlet Valve Inspection
S6RW0C1706011
WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk or fire
and personal injury.
Check fuel tank inlet valve for the following.
If any damage or malfunction is found, replace.
• Damage
• Smooth opening and closing
Fuel Tank Removal and Installation
WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
I7RW01170013-01
Service" in order to reduce the risk of fire and
personal injury.
Removal
1) Relieve fuel pressure in fuel feed line according to
"Fuel Pressure Relief Procedure".
2) Disconnect negative cable at battery.
3) Remove fuel filler cap.
4) Insert hose of a hand operated pump into fuel filler
hose (1) and drain fuel in space "A" as shown in
I2RH0B170018-01
figure.
CAUTION
!
Do not force pump hose into fuel tank.
2. Inlet check valve
S6RW0C1706012
I2RH0B170019-01
S6RW0C1706013
I4RS0B170022-01
Advertisement
Chapters
Table of Contents
Troubleshooting
