Mitsubishi Electric MELSEC iQ-R Series User Manual page 89

■When stopping the recording function in the "Recording Monitor" screen during file saving
The processing continues until the file saving is completed.
When changing a recording setting and starting the recording function in the "Recording Monitor" screen before file saving is
completed, the changed setting becomes enabled after the file saving is completed.
Whether the file saving is completed can be checked in 'Recording files saving completion' (Un\G1508, Un\G1708, Un\G1908,
*1
Un\G2108) of a recorder module/camera recorder module. (Page 221 Recording status area (Un\G1500 to 3199), Page
271 Recording status area (Un\G1500 to 3199))
*1 Buffer memory of a module set as the main one when configuring multiple modules
Page 67 Operation of the recording function when configuring multiple modules
■Formatting an SD memory card during file saving
An SD memory card cannot be formatted while a file is being saved to the SD memory card.
Format it after the file saving is completed.
Whether the file saving is completed can be checked in 'Recording files saving completion' (Un\G1508, Un\G1708, Un\G1908,
*1
Un\G2108) of a recorder module/camera recorder module. (Page 221 Recording status area (Un\G1500 to 3199), Page
271 Recording status area (Un\G1500 to 3199))
*1 Buffer memory of a module set as the main one when configuring multiple modules
Page 67 Operation of the recording function when configuring multiple modules
■When turning the power OFF or resetting a CPU module during file saving
When turning the power OFF or resetting a CPU module while a file is being saved to an SD memory card, the file is deleted
without being saved.
In addition, the SD memory card may be damaged. Stop file access, then turn the power OFF or reset the CPU module.
When turning the power OFF or resetting a CPU module while a file is being saved to a file server, the file is deleted without
being saved.
Make sure that the file saving is completed in the "Recording Monitor" screen, then turn the power OFF or reset the CPU
module.
■When removing an SD memory card during file saving
When removing an SD memory card without stopping file access while a file is being saved to the SD memory card, the file is
deleted and the SD memory card may be damaged.
Read a required recording file in GX Works3 before removing the SD memory card.
■If the network is disconnected during file saving
If the network is disconnected between a recorder module/camera recorder module and a file server while a file is being
saved to the file server, the file is deleted.
■When displaying the event history during file saving
An event history file is also saved as a recording result; therefore, when displaying the event history during file saving, it may
take longer to display the event history or complete the file saving.
■Saving a recording file when configuring multiple modules
A recording file is saved to the main and sub modules at the same time.
Once saving a recording file starts, data accumulation stops until the file is saved to all the modules.
When the recording file is saved to all the modules, the data accumulation restarts.
If saving a recording file fails in the main module, it also fails in a sub one.
If there is video data that failed to be saved in a camera recorder module, video data other than the failed data is saved.
Page 67 Operation of the recording function when configuring multiple modules
1 FUNCTIONS
87
1.1 Recording Function
1