Got Linkage Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

GOT linkage function

This function can be used to check a live video of a network camera and adjust its PTZ in a GOT connected to a CPU module
on the same network as the network camera.
To use this function, the setting in a GOT is required.
The following table shows the list of functions included in the GOT linkage function.
Function
Live video display function
Camera adjustment function (PTZ)
For details on the setting in a GOT and the combinations of versions of a sample screen and camera recorder module, refer to
the following:
Mitsubishi Electric Programmable Controller Camera Recorder Module RD81RC96-CA Sample Screen Manual (BCN-
*1
P5999-1333)
*1 Can be downloaded from the Mitsubishi Electric FA website.
• This function can be used only for one GOT per camera recorder module.
• A CPU module and GOT must be connected via Ethernet; otherwise, this function cannot be used.
Precautions
To use the GOT linkage function, select "Enable" for "GOT Linkage Enable/Disable" in the "Common Settings" screen in the
module extended parameter.
When selecting "Enable" for "GOT Linkage Enable/Disable," a GOT with the IP address set in the "Common Settings" screen
in the module extended parameter can be linked.
For details on the module extended parameter, refer to the following:
Page 103 Module Extended Parameters (Camera Recorder Module)
Live video display function
This function can be used to display a live video of a network camera in a GOT connected to a CPU module on the same
network as the network camera.
To use this function, the login name and password set in the FTP server setting in a GOT must be specified in the "Common
Settings" screen in the module extended parameter.
Note that when enabling the simple setting mode, the video rotation angle and video quality are automatically set according to
a network camera used; therefore, they cannot be set in a GOT.
The following table shows the items that can be set in a GOT.
Item Description
Resolution Specify the resolution of a live video to be
displayed in a GOT.
Video rotation angle Specify the rotation angle of a live video to be
displayed in a GOT.
Video quality Set the quality of a live video to be displayed in a
GOT.
Description
To display a live video from a network camera set as a connection target in a GOT.
To adjust the range of data captured by a network camera set as a connection target in a GOT.
In addition, an adjusted range can be registered as a preset position.
For details, refer to the following:
Page 245 Camera adjustment function (PTZ)
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
Setting value
A value is fixed for each sample project as follows:
Sample project
VGA
XGA
SoftGOT(1024×631)
SoftGOT(1920×960)
• 0
• 180
• High
• Middle
• Low
Live video
QVGA(320×240)
VGA(640×480)
VGA(640×480)
SVGA(800×600)
249
7.1 Function Details
7