Mitsubishi Electric MELSEC iQ-R Series User Manual page 30

■Position where a file saving trigger is satisfied
The timing when a file saving trigger is satisfied is associated with that of device and label sampling and saved to a recording
file, and can be checked as the position where the file saving trigger is satisfied on the offline monitor.
The position where a file saving trigger is satisfied is displayed on the offline monitor as follows:
• When selecting "Each Scan" for the sampling method: Same timing as device and label sampling
• When selecting an item other than "Each Scan" for the sampling method: Same timing as device and label sampling
immediately before a trigger is satisfied
*1 The position can be checked with a trigger position marker even when playing a video file in GX VideoViewer.
The position where it is displayed is the same as the position where the file saving trigger is satisfied.
For details on the trigger position marker, refer to the following:
GX VideoViewer Version 1 Operating Manual
Establishment of a trigger condition is registered as an event; therefore, its timing can be checked when
reproducing data on the offline monitor.
Completion of saving a recording file is also registered as an event, but an event history is not output to the
saved recording file.
Precautions
Start the recording function and check that its operating status switches to 'operating' then satisfy a file saving trigger if data is
accumulated in the recording buffer. The operating status can be checked in 'In recording operation' (Un\G1501, Un\G1701,
Un\G1901, Un\G2101)
3199), Page 271 Recording status area (Un\G1500 to 3199))
*1 Buffer memory of a module set as the main one when configuring multiple modules
Page 67 Operation of the recording function when configuring multiple modules
1 FUNCTIONS
28
1.1 Recording Function
*1
of a recorder module/camera recorder module. (Page 221 Recording status area (Un\G1500 to
*1