Mitsubishi Electric MELSEC iQ-R Series User Manual page 125

Ex.
When selecting D70 as a sampling target, devices in the range of D64 to D95 (32 words) are specified as sampling targets.
When opening this screen again, the checkboxes of these devices are selected in the "Sampling Target" column.
To exclude them from the sampling target, unselect all the checkboxes in the "Sampling Target" column.
(1) The checkboxes of devices in the range of D64 to D95 are selected in the "Sampling Target" column.
(2) Devices in the range of D90 to D99 are not selected as sampling targets because they are not included in the range of D64 to D95.
(3) Unselect the checkboxes of all the devices in the range of D64 to D95.
(1)
(2)
(3)
3.3 Device/Label Sampling Setting
3 RECORDING SETTING
123
3