Mitsubishi Electric MELSEC iQ-R Series User Manual page 110

■Communication test screen
The communication test can be performed between a camera recorder module and a network camera based on a set IP
address, user ID, password, and TCP port number.
When the communication test is successful, basic and support information of the network camera can be acquired. In
addition, the acquired resolution, frame rate, or event notification can be applied to the "Camera Individual Settings" screen.
Item
Communication IP Address
Test
User ID
Password
TCP Port Number
[Execute] button
2 PARAMETER SETTING
108
2.3 Module Extended Parameters (Camera Recorder Module)
Description
*1
Set the IP address of a network camera.
*1*2
Set the user ID of a network camera.
*1*2
Set the password for a network camera.
*1*2
Set the TCP port number of a network camera.
Click this to perform the communication test based
on the IP address, user ID, password, and TCP port
number.
(1)
*3
Setting range
• 1.0.0.1 to 223.255.255.254 (The IP
address must start with a value from 1 to
223, excluding 127.)
(Default: Value set in the "Camera Individual
Settings" screen)
• Character string up to 32 characters
(Default: Value set in the "Camera Individual
Settings" screen)
• Character string up to 32 characters
(Default: Value set in the "Camera Individual
Settings" screen)
• 1 to 4999, 5010 to 65534
(Default: Value set in the "Camera Individual
Settings" screen)
