File Saving Trigger Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.4

File Saving Trigger Setting

This section shows the screen for setting a device specified as a file saving trigger for saving accumulated data at a timing
such as when a device of a CPU module rises or falls.
CPU stop error detection can also be specified as a condition for satisfying a trigger.
In addition, camera events can be specified as file saving triggers in the camera event trigger setting.
Window
Click "File Saving Trigger Setting" in the setting item list.
Displayed items
Item
No.
Device
*3
Establishment Condition
*3*4
Time-out Period
*3*4
Unit
*3
Comment
Save when CPU stop error is
detected
[Camera Event Trigger Setting]
*5
button
*1 For devices that can be specified, refer to the following:
Page 43 Devices that can be specified as triggers
*2 Displayed in red when specifying a device not included in the range set for "Device Setting" in the CPU parameter.
*3 Can be edited when specifying a device in the "Device" column.
*4 Can be edited when selecting "Timeout" in the "Establishment Condition" column.
*5 Appears when one or more camera recorder modules are set in the I/O assignment setting.
Description
The condition numbers are displayed.
Specify a device used to determine whether a file saving trigger is satisfied.
Select a condition for satisfying a file saving trigger.
• : When the bit rises
• : When the bit falls
• Timeout: When the bit does not change within a time set in the "Time-out Period" column
Specify a time before a timeout is detected.
The range of values that can be set differs depending on each unit as follows:
• Second: 1 to 86400
• Minute: 1 to 1440
• Hour: 1 to 24
Specify the unit of time before a timeout is detected.
Set a comment to supplement a saving cause (up to 64 characters).
Select the checkbox to specify CPU stop error detection as a trigger.
Click this to open the "Camera Event Trigger Setting" screen.
When setting one or more camera event trigger settings, "Already Set" is displayed to the right of this button.
*1*2
3 RECORDING SETTING
3.4 File Saving Trigger Setting
3
135