Event Code List - Mitsubishi Electric MELSEC iQ-R Series User Manual

Event code list

The following table shows the event code list of a camera recorder module.
Event Event type Event
code classificatio
n
00170 System Information
00171 System Information
00600 System Information
00610 System Information
00C00 System Warning
00C01 System Warning
00D01 System Warning
00DC0 System Warning
00DF1 System Warning
00E72 System Warning
20400 Operation Information
20401 Operation Information
24020 Operation Information
24021 Operation Information
24030 Operation Information
24031 Operation Information
24040 Operation Information
24044 Operation Information
24050 Operation Information
24051 Operation Information
26030 Operation Information
26190 Operation Information
261A0 Operation Information
261B0 Operation Information
261C0 Operation Information
2A010 Operation Warning
2A030 Operation Warning
Overview
Co-recording trigger sending
Co-recording trigger receiving
Communication Retry Start
Communication Retry Recovery
Recording Start with Program Inconsistency
Program Inconsistency during Recording
Operation
Network Camera Undetected
Network Camera Communication Start Failure
Network Camera Communication Failure
Network Camera Communication Failure
Firmware update succeeded(Camera recorder
module)
Firmware update failed(Camera recorder module)
Recording Operation Start
Recording Operation Stop
File Saving Trigger Establishment
Recording Files Saving Completion
Error Clear
INFO LED Off
Project Data Saving Start
Project Data Saving Completion
Execution of Saving by Camera Event Detection
Live Video Delivery Failure
Live Video Delivery Failure
Live Video Delivery Failure
Live Video Delivery Failure
SD Memory Card Initialization
Recording Files Saving Completion
Cause
The co-recording trigger has been sent.
The co-recording trigger has been received.
• Because the communication with the network
camera was disconnected, the communication
retry processing was performed.
• Unable to receive or store the video shot by the
network camera during the communication
disconnected period.
The communication with the network camera has
been recovered.
It is different from the project (program, FB/FUN) at
the recording setting because a program file or FB/
FUN file in the CPU module was changed during
recording operation.
When a device/label that is not a sampling target is
added, the added device/label cannot be saved and
replayed.
It is different from the project (program, FB/FUN) at
the recording setting because a program file or FB/
FUN file in the CPU module was changed during
recording operation.
When a device/label that is not a sampling target is
added, the added device/label cannot be saved and
replayed.
Failed to find the target network camera.
Failed to start communication with the target network
camera.
Failed to connect to the target network camera.
Failed to communicate with the target network
camera.
The firmware of the Camera recorder module was
successfully updated.
The firmware update of the Camera recorder module
failed.
The recording operation has been started.
The recording operation has been stopped.
The file saving trigger has been established.
Saving the recording files has been completed.
Errors have been cleared.
INFO LED has been turned off.
Saving the project data has been started.
Saving the project data has been completed.
The recording files were saved by camera event
detection.
Failed to perform the live video delivery start
processing.
Failed to deliver the live video.
An error has occurred on the live video receiving
side.
Failed to perform the live video delivery stop
processing.
The SD memory card has been initialized.
• Saving the recording files has been completed.
• Failed to save the event history file.
5 TROUBLESHOOTING
5.7 Camera Recorder Module
5
197