Mitsubishi Electric MELSEC iQ-R Series User Manual page 190

Error code Error name
1931H Recording Files Saving Error
1932H Recording Files Saving Error
1934H Recording Files Saving Error
1935H Recording Files Saving Error
1936H Recording Files Saving Error
1937H Recording Files Saving Error
1938H Recording Files Saving Error
1939H Recording File Saving Error
Detection of Sub
1981H SD Memory Card Initialization
Error
1982H SD Memory Card Error
1A80H IP Address Automatic
Acquisition Error
5 TROUBLESHOOTING
188
5.7 Camera Recorder Module
Error description
Failed to save recording files because the
connection to the file server failed.
Failed to save recording files because the
connection to the file server failed.
Failed to save recording files because the
access to the file server failed.
Failed to save recording files because the
management file could not be saved due to
the insufficient free space in the file server.
Failed to save some recording files because
the free space in the file server was
insufficient.
Failed to save recording files because old
recording files could not be deleted.
Failed to save recording files because an
error was detected at the time of access to
the file in the file server.
An error has been detected in the recording
file saving processing of the Sub.
Failed to initialize the SD memory card.
An error of the SD memory card was
detected.
Failed to acquire the network parameter
information from the DHCP server.
Corrective action
• Please save files after checking that the user name/
password used for the connection to the file server is
correct.
• If video data receiving targets set in the recording
setting, please reduce the load by modifying the
module extended parameter.
• Please save files after checking that the folder name
set in the saving path setting exists in the file server.
• If video data receiving targets set in the recording
setting, please reduce the load by modifying the
module extended parameter.
• Please save files after checking that the file server is
connected to the network.
• If video data receiving targets set in the recording
setting, please reduce the load by modifying the
module extended parameter.
Please delete unnecessary files in the file server to
allocate free space.
Please delete unnecessary files in the file server to
allocate free space.
• Please check if the user set in the saving path setting
has write authority to the saving path.
• Please check if several modules and applications are
accessing the saving destination folder in the file
server simultaneously.
• If video data receiving targets set in the recording
setting, please reduce the load by modifying the
module extended parameter.
• Please check if files and folders under the saving
destination folder in the file server are not set Read-
only or Encrypt attributes.
• Please check if the user set in the saving path setting
has write authority to the saving path.
• Please check if several modules and applications are
accessing the saving destination folder in the file
server simultaneously.
• If video data receiving targets set in the recording
setting, please reduce the load by modifying the
module extended parameter.
• Please check if files and folders under the saving
destination folder in the file server are not set Read-
only or Encrypt attributes.
Please check the details of the Sub error by the module
diagnostics of the engineering tool, and clear the error.
• Please check whether the SD memory card is
inserted without fail.
• Please check the SD memory card is not initializing.
• If the write-protect switch of the SD memory card is
enabled, please insert the SD memory card after
disabling it.
• If the recording function is active, stop it.
• Please replace the SD memory card.
• If the write-protect switch of the SD memory card is
enabled, please insert the SD memory card after
disabling it.
• Please format the SD memory card, or insert the SD
memory card again. If the same error is displayed, a
hardware error may have occurred in the SD memory
card. Please replace the SD memory card.
• Please check the status of the connection with the
DHCP server.
• Please check the connection cable.
• Please review the DHCP server setting.