Mitsubishi Electric MELSEC iQ-R Series User Manual page 107

Camera individual setting
The following shows the screen for setting each item for a network camera.
Items and ranges that can be set differ for each network camera.
Item
*1
[Network Camera List] button
Simple Setting Mode
Camera Required Settings
Individua
l
*
Settings
2
Description
Click this to display the "Network Camera List" screen.
Page 107 Network camera list screen
Select the checkbox to switch to the simple setting
mode.
Page 237 Simple setting mode
Camera Type Set the type of a network camera.
IP Address Set the IP address of a network camera.
TCP Port Set the TCP port number of a network camera.
*3
Number
Camera Set a comment to identify a network camera.
*4
Comment
Resolution Set the resolution of a video captured by a network
camera.
Video Frame Set the frame rate of a video captured by a network
Rate [fps] camera.
Video Codec Set the codec for a video captured by a network camera.
*3
User ID Set the user ID of a network camera.
*3
Password Set the password for a network camera.
Setting range
ONVIF supported network camera

• Selected
• Unselected
(Default: Selected)
• ONVIF supported network camera
(Default: ONVIF supported network camera)
• 1.0.0.1 to 223.255.255.254 (The IP address
must start with a value from 1 to 223,
excluding 127.)
(Default: Empty)
• 1 to 4999, 5010 to 65534
(Default: 80)
• Empty (no camera comment set)
• Character string up to 32 characters
(Default: Empty)
• VGA (640  480)
• HD (1280  720)
• SXVGA (1280  960)
• FHD (1920  1080)
(Default: HD (1280  720))
• 10
• 30
• 120
• 180
(Default: 30)
• H.264
• Character string up to 32 characters
(Default: Empty)
• Character string up to 32 characters
(Default: Empty)
2.3 Module Extended Parameters (Camera Recorder Module)
2 PARAMETER SETTING
105
2