Recording File - Mitsubishi Electric MELSEC iQ-R Series User Manual

Recording file

A recording file can be saved to either of the following save destinations.
Save destination
SD memory card
File server
*1 The folder name differs for each recording setting.
Setting No.1: RC1
Setting No.2: RC2
Setting No.3: RC3
Setting No.4: RC4
*2 For details on save destination folders, refer to the following:
Page 138 File server setting
For centrally managing recording files saved in multiple systems, it is recommended to specify a file server as
the save destination.
Precautions
• Prepare a folder for saving recording files on a file server in advance; otherwise, recording files will not be saved.
• When using a file server in multiple systems to save recording files, specify a different folder for each system; otherwise,
files may not be saved properly.
• Do not enable the read-only or encryption attribute for folders for saving recording files, or files and folders under these
folders. If enabled, recording files may not be saved properly.
Folder configuration in an SD memory card
RECORD
*1 Do not edit or delete it.
Save destination folder
*1
RECORD\(setting type folder)
*2
(Save destination folder specified in the file server setting in the recording setting)\RECORD\(setting type folder)
Setting type
folder
RC1
RC2
1TS01_000
1TS01_001
1TS01_002
SZ.BIN
2TS10_000
SZ.BIN
*1
Recording
file
Recording
file
Recording
file
System
management file *1
Recording
file
System
*1
management file
1 FUNCTIONS
49
1.1 Recording Function
1