Mitsubishi Electric MELSEC iQ-R Series User Manual page 238

Specific information monitoring
Specific information of a network camera can be acquired.
Acquired information can be checked in the following screens or buffer memory; however, information that can be checked
differs for each screen.
• "Network Camera List" screen in the module extended parameter (Page 107 Network camera list screen)
• "Communication Test" screen in the module extended parameter (Page 108 Communication test screen)
• Buffer memory of a camera recorder module (setting information in the network camera 1 to 4 status areas) (Page 282
Network camera status area (Un\G34000 to 37999))
: Can be checked, : Cannot be checked
Information
Camera manufacturer name
Camera model name
IP address
TCP port number
Camera F/W version
MAC address
*3
Resolution support list
Frame rate support upper/lower limit
value
PT support
Z support
PTZ speed support
Video rotation angle support
SNTP client function support
Camera event type support list
*1 Information on a network camera acquired when searching for the network camera or performing the communication test is displayed.
*2 Information on a network camera acquired when starting the communication with the network camera is displayed.
*3 A resolution that can be set for a network camera in a camera recorder module is displayed.
*4 Whether the video rotation angle can be set for a network camera in a camera recorder module is displayed.
*5 A camera event type that can be set for a network camera in a camera recorder module is displayed.
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
236
7.1 Function Details
Network camera list screen











*4


*5

*1
Communication test screen














*1 *2
Buffer memory













