Mitsubishi Electric MELSEC iQ-R Series User Manual page 68

Stop
To stop the recording function, perform any of the following operations:
• Switch a CPU module from RUN to STOP.
• Switch a CPU module to PAUSE.
• Stop the recording function in the "Recording Monitor" screen.
*1 The operating statuses for all recording settings switch to 'stopped.'
*2 When the operating status for a recording setting is 'saving' or 'file saving trigger satisfied,' data sampling, reception, and accumulation
stop and the operating status switches to 'stopped' after file saving is completed.
*3 When the operating status for a recording setting is 'file saving trigger satisfied,' data sampling, reception, and accumulation stop and
the operating status switches to 'saving' then 'stopped.'
Precautions
• Sampling devices and labels stops in a CPU module and accumulating devices and labels stops in a recorder module/
camera recorder module. Data sampled and accumulated before the stop is discarded.
• Delivering video data from a network camera stops and receiving and accumulating video data stop in a camera recorder
module.
• If there is accumulated data, it is recommended to save it by an operation such as satisfying a file saving trigger before stop
operation.
Starting to save a recording file
To start saving a recording file, satisfy a file saving trigger. (Page 27 File saving trigger)
After the file saving trigger is satisfied, a recorder module/camera recorder module outputs data accumulated in the recording
buffer to a recording file and saves it to a save destination specified in the recording setting. (Page 60 Recording buffer)
1 FUNCTIONS
66
1.1 Recording Function
*1*2*3
*1*2
*2
(Page 143 RECORDING MONITOR)