Writing Recording Settings, Parameters, And Programs - Mitsubishi Electric MELSEC iQ-R Series User Manual

Writing recording settings, parameters, and programs

The following table shows operations when writing recording settings, CPU parameters, and programs to a CPU module
individually.
: Applicable, : Not applicable
No. Adding/ Changing CPU
changing a parameters
recording
setting
 
1
 
2
 
3
4  
 
5
6  
 
7
*1 Even when not editing programs, they may be different from those that were applied when configuring the recording setting after
converting the programs. Make sure to write the recording setting and programs to the CPU module.
Adding/ Condition
changing a
*1
program

Write recording settings while the program setting in the CPU parameter and
programs match between a CPU module and GX Works3.
[Method for checking whether they match]
*1
Verify CPU parameters and programs with a CPU module.
For details, refer to the following:
GX Works3 Operating Manual
[Corrective action if they do not match]
Create a new project, read CPU parameters and programs from a CPU module,
then create recording settings again.

Write recording settings and CPU parameters while programs match between a
CPU module and GX Works3.
[Method for checking whether they match]
*1
Verify programs with a CPU module.
For details, refer to the following:
GX Works3 Operating Manual
[Corrective action if they do not match]
Create a new project, read programs from a CPU module, then create recording
settings and CPU parameters again.

Write recording settings and programs while the program setting in the CPU
parameter matches between a CPU module and GX Works3.
[Method for checking whether they match]
Verify CPU parameters with a CPU module.
For details, refer to the following:
GX Works3 Operating Manual
[Corrective action if they do not match]
Read CPU parameters from a CPU module.
 Refer to the following:
Page 74 With changing parameters

Write CPU parameters, recording settings, and programs.
Or, read recording settings and programs from a CPU module, then write them
and CPU parameters.
 Write CPU parameters, recording settings, and programs.
Or, read recording settings from a CPU module, then write them, CPU
parameters, and programs.

Write recording settings and programs.
Or, read recording settings from a CPU module, then write them and programs.
To add or delete a program or change its name, CPU parameters must be
changed. Refer to the condition shown in No.6.
1 FUNCTIONS
75
1.1 Recording Function
1