Camera Adjustment Function (Ptz) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Camera adjustment function (PTZ)

This function can be used to adjust the range of data captured by a network camera set in the module extended parameter.
An adjusted range can also be registered in a camera recorder module as a preset position.
This function can be set and performed in the following:
• "Camera Individual Settings" screen in the module extended parameter (Page 105 Camera individual setting)
• "Preset Position Settings" screen (Page 111 Preset Position Setting (Camera Recorder Module))
• Sample screen of a GOT (Mitsubishi Electric Programmable Controller Camera Recorder Module RD81RC96-CA
Sample Screen Manual (BCN-P5999-1333)
*1 Can be downloaded from the Mitsubishi Electric FA website.
• Buffer memory of a camera recorder module
The following table shows the list of functions included in the camera adjustment function.
: Can be performed/set, : Cannot be performed/set
Item Description
PTZ control function To adjust the range of data captured by a
network camera by performing PTZ control.
Preset position function To register an adjusted range (PTZ values)
as a preset position.
Moving to a registered preset position is
also available.
PTZ control authority mode To set the authority to perform the PTZ
function control function and preset position
function.
Precautions
To use this function, account authentication is required. (Page 235 Account authentication)
PTZ control function
This function can be used to adjust the range of data captured by a network camera by setting PTZ values (pan, tilt, and
zoom) and a movement speed value for a specified network camera in a camera recorder module.
The following table shows the setting items used for PTZ control.
Setting item
Specified pan value
Specified tilt value
Specified zoom value
Specified movement speed value
PTZ control can be performed in a sample screen of a GOT. (Mitsubishi Electric Programmable Controller Camera
Recorder Module RD81RC96-CA Sample Screen Manual (BCN-P5999-1333)
*1 Can be downloaded from the Mitsubishi Electric FA website.
*1
)
Description
Specify a position to move the range of data captured by a network camera horizontally (-1000 to 1000).
Specify a position to move the range of data captured by a network camera vertically (-1000 to 1000).
Specify a position to zoom in or out the range of data captured by a network camera (0 to 1000).
Specify a movement speed of the range of captured data by performing PTZ control (0 to 1000).
7 CAMERA RECORDER MODULE (DETAILED SPECIFICATIONS)
Operation/setting availability
"Camera "Preset
Individual Position
Settings" Settings"
screen screen
 
 
 
*1
)
Sample Buffer
screen of a memory
GOT
 
  (Moving to a
preset position
only)
 
7.1 Function Details
7
245