Mitsubishi Electric MELSEC iQ-R Series User Manual page 132

Wild card Target
[!] Any one character except for one in the brackets
[-] Character strings within the range in the brackets
■Case in which an error occurs
Precautions
■When specifying an array element as a filter
An array element is regarded as a wild card '[ ].' This causes an unexpected result.
(Example) When specifying "bLabel1[9]" as a filter if 'bLabel1[9]' and 'bLabel19' are included in the list, 'bLabel19' is
displayed.
(Example) When specifying "bLabel1[[0-9]]" as a filter if 'bLabel1[0]' and 'bLabel1[9]' are included in the list, an error occurs.
■When specifying a data type that includes '[ ]' as a filter
A data type is regarded as a wild card '[ ].' This causes an unexpected result.
(Example) When specifying "Word [Signed]" as a filter, it is not displayed.
■When specifying a comment that includes a wild card as a filter
When specifying a comment that includes a wild card (*, ?, or [ ]) as a filter, an expected result may not be obtained.
(Example) When specifying "Detailed Information [1]" as a filter if 'detailed information [A],' 'detailed information [1],' and
'detailed information 1' are included in the list, 'detailed information 1' is displayed.
3 RECORDING SETTING
130
3.3 Device/Label Sampling Setting
• Only the upper or lower limit value is specified or
neither is specified.
(Example) [-], X[-], X[0-], X[-9]
• A value of two or more digits is set for the upper or
lower limit value.
(Example) X[100-5], X[0-100], X[10-20]
• The lower limit value is equal to or greater than the
upper limit value.
(Example) X[0-0], X[9-0]
• A hyphen (-) is specified more than once.
(Example) bLabel[a-x0-1]
Example Result
K4X[!3]0 K4X10, K4X20, K4X40
K[!1-3]X0 K4X0
[B-D]0 B0, C0, D0
D[0-2] D0, D1, D2
K4X[!3-4]0 K4X10, K4X20, K4X50