Mitsubishi Electric MELSEC iQ-R Series User Manual page 195

System recorder
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

Error code
Error name
24C8H
System Bus Error
24E0H
System Bus Error
3000H
Module Parameter Error
3001H
Module Parameter Error
3002H
Module Parameter Error
3010H
Module Error
3013H
Module Error
3020H
Incompatible CPU Error
3021H
Recording Setting Error
3022H
Recording Setting Error
3023H to 3024H
Recording Setting Error
3025H
Recording Setting Error
Error description
An error of the system bus was detected.
An error of the system bus was detected.
There is no module parameter.
The contents in the module parameter are
broken.
• A parameter which is not supported by the
firmware version of the target camera
recorder module was written.
• The contents in the module parameter are
broken.
The control CPU module does not support
the recording function.
A recording setting file which is not
supported by the firmware version of the
target CPU module was written.
• A recording setting file which is not
supported by the firmware version of the
target CPU module was written.
• The contents of the recording setting file
are broken.
• A recording setting file which is not
supported by the firmware version of the
target camera recorder module was
written.
• The contents of the recording setting file
are broken.
The module type set in the engineering tool
does not match the CPU module which is
the write destination of the recording setting
file.
Corrective action
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the I/O module, intelligent
function module, or extension cable. Please consult
your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the CPU module or base unit.
Please consult your local Mitsubishi representative.
• Please check the module position set in the system
parameter of the CPU module (I/O assignment
setting) and the module position of the implemented
module. If they are different, please match the
parameter and implementation status.
• Please write the module parameter again with the
engineering tool. If the same error is displayed again,
please consult your local Mitsubishi representative.
Please write the module parameter again with the
engineering tool. If the same error is displayed again,
please consult your local Mitsubishi representative.
• Please check the version of the camera recorder
module, use a compatible product, and then write the
module parameter again.
• Please write the module parameter again with the
engineering tool. If the same error is displayed again,
please consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the camera recorder module.
Please consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the camera recorder module.
Please consult your local Mitsubishi representative.
Please use a CPU module which supports the
recording function.
Please check the version of the CPU module, use a
compatible product, and then write the recording file
again.
• Please check the version of the CPU module, use a
compatible product, and then write the recording file
again.
• Please take anti-noise measures.
• Please write the recording setting file again. If the
same error is displayed, a hardware error may have
occurred in the data memory of the CPU module.
Please consult your local Mitsubishi representative.
• Please check the version of the camera recorder
module, use a compatible product, and then write the
recording file again.
• Please take anti-noise measures.
• Please write the recording setting file again. If the
same error is displayed, a hardware error may have
occurred in the data memory of the CPU module.
Please consult your local Mitsubishi representative.
Please read the recording setting file, and match the
write destination CPU module and model type.
5 TROUBLESHOOTING
5.7 Camera Recorder Module
5
193

Advertisement

Table of Contents
loading

Table of Contents