Mitsubishi Electric MELSEC iQ-R Series User Manual page 146

Item
File saving
Camera monitor
*1 The progress rate (%) is also displayed when "Saving" is displayed.
*2 If data is cleared, "No Error" is displayed.
For the conditions under which data is cleared, refer to the following:
Page 224 Recording start error (Un\G1502), Page 224 Recording start error cause (Un\G1503)
*3 "-" is displayed when "Stopped" or "Preparing" is displayed in the "Status" column.
*4 If the maximum saving period (estimate) is shorter than the saving period, the cell is displayed in yellow. In this case, data for a set
saving period may not be saved. Perform any of the operations shown in the following:
Page 60 When the capacity of accumulated devices and labels exceeds the buffer capacity
*5 "-" is displayed in any of the following cases:
"Stopped" is displayed in the "Status" column.
"Preparing" is displayed in the "Status" column.
'0' (no data) is stored in 'Recording buffer storing status' (Un\G1507, Un\G1707, Un\G1907, Un\G2107).
*6 Can be clicked when "Stopped" is displayed in the "Status" column.
*7 Can be clicked when an item other than "Stopped" or "Preparing" is displayed in the "Status" column and '1' (data exists) is stored in
'Recording buffer storing status' (Un\G1507, Un\G1707, Un\G1907, Un\G2107).
*8 Can be clicked only during monitoring.
4 RECORDING MONITOR
144
*7
[Execution] button
*8
[Execution] button
Description
Click this to perform file saving of the recording function that is running for a
selected recording setting.
Note that it is not performed if data has never been accumulated and there is
no accumulated data.
In addition, data is not accumulated if a recording startup trigger has never
been satisfied when selecting "Recording Startup Trigger + File Saving
Trigger" for "Recording Method" in the saving period setting.
Accumulated data and the number of successful recording startup triggers can
be checked in the "Recording Status Detailed Information" screen.
Page 145 Recording Status Detailed Information Screen
Click this to open the "Camera Monitor" screen.
Page 147 Camera Monitor Screen