Chapter 2 Parameter Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

2
PARAMETER SETTING
This chapter shows each setting that can be configured in the parameter setting of GX Works3.
Configuring multiple recording settings
The capacity of each setting in the following parameters must be changed before configuring recording settings.
If recording settings are written to a CPU module without changing each capacity, an error occurs when recording starts and
the recording function does not run.
Target module
CPU module
Recorder module
Camera recorder module
*1 The size required for the capacity of the buffer area setting for data sampling can be checked in the "Recording Setting" screen.
*2 The "Recording Buffer Setting" screen appears by double-clicking the recording buffer setting icon (
Parameter
"CPU Parameter"  "Memory/Device Setting"  "Buffer Area Setting for Data Sampling"  "(setting number to be
*1
used)"
"(Recorder module)"  "Basic Settings"  "Recording Buffer Setting"
"(Camera recorder module)"  "Module Parameter"  "Basic Settings"  "Recording Buffer Setting"
number to be used)"
*2
 "(setting number to be used)"
*2
 "(setting
).
2 PARAMETER SETTING
2
93