Canon CXDI-31 Service Manual page 97

• Fuji CR-DPL /FM-DPL + FM-PS551
Maxmum
2200 x 2675 (@160 µm)
equivalet area
in CXDI
100 µm x 3520 x 4280 (value after passing through the print spooler)
• The above settings are the allowable area size in a configuration not using
annotation.
• Annotation will be supported from the next version. Annotation in currently
possible in US-ASCII only. IDs are designated 1 to 6 and correspond to the
top left, top center, top right, bottom left, bottom center, and bottom right,
respectively. The maximum area size with annotation support is 3500 x
4170 for 35 cm x 43 cm and 2538 x 3522 for B4.
• Use the Disable function for N-EVENT-REPORT to disable this setting.
• A function is provided for disabling the returning of warning messages.
0107 (Attribute list error)
0116 (Attribute Value out of Range)
B604 (Image has been demagnified)
Specifications
• The Film Size parameter can be used. The Media Type (BLUE, CLEAR)
parameter can also be used.
• The Film Orientation parameter is fully supported.
• The following presets are made so that LUT has the DMAX = 3.2D
equivalent curve required by CXDI.
Gamma type #17 (SAR system)
2 Installation Manual
Density
Point 1 1.57
Point 2 2.29
- 71 -
Return/Not return
Return/Not return
Return/Not return
Shift Contrast
0.10 1.00
0.15 1.00