Canon CXDI-31 Service Manual page 94

• Konica Drypro 722 + Printlink
-A 320 -T NO -M CUBIC -m 2 -S "KC_LUT=1" –O PORTRAIT –P NORMAL –B
BLACK
(entered in param member)
80 (entered in pixel pitch member)
14x17
4424 (entered in W member)
5324 (entered in H member)
14x14
4424 (entered in W member)
4372 (entered in H member)
11x14
3436 (entered in W member)
4424 (entered in H member)
• Trimming OFF
• Cubic spline interpolation
• Smoothing type
1: BILINEAR
2: Sharp by spline interpolation
3: Slightly weak by spline interpolation
4: Weaker by spline interpolation
• Maximum density: 3.20
Maximum density 3.20 could not be achieved before.
• Konica Li-62P + Printlink
-A 320 -T NO -M CUBIC -m 2 -S "KC_LUT=1" –O PORTRAIT –P NORMAL –B
BLACK
80 (entered in pixel pitch member)
14x17
4268 (entered in W member)
5108 (entered in H member)
14x14
4268 (entered in W member)
4104 (entered in H member)
11x14
3204 (entered in W member)
4268 (entered in H member)
• Trimming OFF
• Cubic spline interpolation
• Smoothing type
1: BILINEAR
2: Sharp by spline interpolation
3: Slightly weak by spline interpolation
4: Weaker by spline interpolation
• Maximum density: 3.20
Before, maximum density 3.20 could not be achieved.
2 Installation Manual
- 68 -