Dc/Dc Conversion Board - Canon CXDI-31 Service Manual

(8) LED control
Sensor conditions are shown as [Table.1] below.
Condition
Sleep
Ready
Sleep to Ready
Error
(9) Serial communication
Performs the serial communication with the Control Station, C2 by using the SCI (Serial
Communication Interface) to control the total operation of the CST AD-IF Board.
(10) Recording logs
Saves the logs related to the total power-on time, number of images taken and the driving
sequence of the LANMIT UNIT to the built-in flash memory.
(11) Remote update
Allows to update the imaging codes and the codes for driving the LANMIT UNIT from the
Control Station C2.
(12) Control line check
Checks whether each control line operates properly according to the commands by the
Capture Board.

2.4. DC/DC Conversion Board

Receives the 14V power from the E/O BOX 31 IF Board and supplies the PCB-AD2
LANMIT UNIT and IC with the driving power.
3. CXDI-31 Imaging Unit
Color
Orange
On
Off
Off
Off
[Table.1]
- 4 -
Green
Off
On
Blink
(every 500ms)
Irregular blink
(100ms Blink 100ms Off
100ms Blink 500ms Off)