Set Up Startup Menu - Canon CXDI-31 Service Manual

4.3.6. Set Up Startup Menu

(1) Purposes
• Adding to Start menu
To automatically start up the CXDI application when you turn on the power of the CXDI system.
• Charging the window size
To reduce the size of the window when CXDI starts up so that it is not highly visible.
• Removing from the Start menu
To prevent start up of the CXDI application when you turn on the power of the CXDI system.
(2) Notes
1) In the default settings, the CXDI is not set to the Start menu.
After the installation work is completed, be sure to always add the CXDI to the Start
menu.
2) The window size is an association function with the shortcut registered to the Start menu.
Be sure to change the size of the window when setting the CXDI to start up.
(3) Adding CXDI application software onto the Start menu
1) Connect keyboard and mouse to the control PC.
2) Make sure you have already installed necessary software. Turn on the power of all
devices and start Windows NT.
3) Click the Start button, point to Settings, and then click Taskbar...
4) Taskbar Properties appears. Click the Start Menu Programs and then click Add.
5) Create a shortcut appears. Click Browse.
6) Browse appears. Find a file named ccrstart.bat in drive [D:\ccr] and click Open.
7) D:\ccr\ccrstart.bat appears in the Command line. Click Next.
8) Select Program Folder appears. Select Startup folder and click Next.
2 Installation Manual
- 35 -