(4) Insert the photocoupler to the back of control PC unit and attach A with two screws C. (Fig.
5) In this condition, the cable clamp is free.
(5) Tighten nut 2 of the cable clamp while lightly pressing the photocoupler cable against the
control PC unit. (Fig. 6)
(6) After the attachment, check that the photocoupler cable is securely locked.
2. Installation Manual
C x 2
A
(Fig. 5)
Nut 2
(Fig. 6)
- -
17
Lightly press
it.