Canon CXDI-31 Service Manual page 83

(5) -L sessionLabel
-L sessionLabel
Film session label (character string)
Meaning * This parameter is used in the DICOM Basic Film Session (2000, 0050).
* The label for the film session is for designation purposes only, and generally it
is not displayed directly on the print image.
Description The parameter is not transferred over DICOM if it is not designated.
* This parameter may be displayed in some form or another depending on the
installed printer. For example, it may be displayed in the Control Panel for the
printer or in the corner of the film.
(6) -f films
-f films
Number of film box to be printed
Meaning * Currently, this parameter is not operating.
Description
(7) -l FilmSizeID
-l FilmSizeID
Film size
14 inch x 17 inch / 17 inch x 14 inch / 11 inch x 14 inch / -l FilmSizeID / 10 inch x 14 inch
10 inch x 12 inch / 24 cm x 24 cm / 24 cm x 30 cm
Meaning * This parameter is used in the DICOM Basic Film Box (2010, 0050).
* This parameter designates the size of the film to be printed
Description The parameter is not transferred over DICOM if it is not designated. In this
case, the printer default values are used. When this parameter is not transferred,
problems can occur since unsuitable default values may be used.
* Some printers do not print until a supply magazine of the designated size is
loaded, and others print even though the designated size is different from the
currently loaded supply magazine.
(8) -M magnification
-M magnification
Interpolation method (NONE/REPLICATE/BILINEAR/CUBIC)
Meaning * This parameter is used in the DICOM Basic Film Box (2010, 0060).
* This parameter designates the interpolation method since the printer has a
higher resolution than the CXDI in most cases.
* Generally, CUBIC provides the best results, followed by BILINEAR. The
REPLICATE option is not suitable for CXDI image applications.
Description The printer default values are used if this parameter is not entered. When this
parameter is not transferred, problems can occur since unsuitable default values
may be used.
2 Installation Manual
- 57 -