Canon CXDI-31 Service Manual page 121

10) The [TCP/IP Properties] window appears. Click the [IP Address] tag, set to [Specify an
IP address], and input the following items.
IP Address : Input the address just before or after the control PC's IP address.
(Example) Control PC: 192.168.1.19 Laptop PC: 192.168.1.18 or 20
Subnet Mask: Set the same as the control PC.
11) Click the [WINS Configuration] tag and set to [Disable WINS Resolution].
12) Click the [DNS Configuration] tag and set to [Disable DNS].
13) Click [OK].
14) The screen returns to the [Network] window. Click [OK].
15) The [System Settings Change] window appears. Click [Yes] and reboot the computer.
16) After rebooting, the [Enter Network Password] window appears. Click [Cancel].
17) The Windows95 desktop screen appears. Open [My Computer].
18) The [My Computer] window appears. Click the hard drive to which the control PC data
is to be backed up with the right button of the mouse, then click [Sharing].
* This section describes the backup drive as "C".
19) The [(C:) Properties] window appears. Set to [Shared As:] and then set [Access Type:] to
[Full].
* Do not set a password.
20) Click [OK].
21) Open [My Computer] from the Windows NT desktop screen of the control PC.
22) The [My Computer] window appears. Open the "D"drive in this window.
23) Open [Network Neighborhood] from the Windows NT desktop screen of the control PC.
2 Installation Manual
- 95 -