Canon CXDI-31 Service Manual page 166

3) Route the cables carefully so that they are not stranded to the rim of the cover (Position A
below). Put the tape on the position 4. Adjust the length of the cable at position B. Put the
tape on the position 5. (The same criteria as the position 2 and 3 can be applied here)
5
B
4) Make sure the tape is not peeled off, not pasted in the wrong position, or the cable is not
stranded to the rim of the cover (especially on the position circled below).
*If the tape is applied to the wrong position, the cable may be damaged. Therefore,
make sure you put the tape on the correct position.
3. CXDI-31 Imaging Unit
4
- 10 -
A