Canon CXDI-31 Service Manual page 172

(6) Replace the cable and connect the connector.
(7) At reassembly, reverse the steps (1) to (5) above.
Note:
The exterior cover is made of a magnesium alloy. Remember that tightening the screws
with excessive force could strip the nut.
Note:
When attaching the rear cover, be careful not to pinch the power cables and the others
with the covers. Refer to "3.1.3 Notes on installing the rear cover in "3.1 Notes".
3. CXDI-31 Imaging Unit
- 16 -