Cxdi-31 System Installation Procedure - Canon CXDI-31 Service Manual

2.2. CXDI-31 system installation procedure

No. Step
1 Unpacking and
checking the product's
constituent parts
2 To connect the image
Unit and the E/O box
3 To connect the E/O box
and the sensor unit
4 To connect the E/O box
and the multi box
5 To connect the multi
box and the control PC
6 To connect the multi
box and X-ray
generators
7 Checking the software
program's version
10 Installing the LANMIT
Image correction data
11 Identifying the imaging
units and setting the
number of units to be
connected (inputting the
sensor serial numbers)
12 Adjusting the timing
with the X-ray
generators
2. Installation Manual
Conditions and checkpoints
There must be no missing parts, damage,
dents, etc.
- Handle the instrument carefully, as it may
be damaged if something is hit against it,
dropped, or receives a strong jolt.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The manufacturer of the X-ray generators
must be asked to handle the connections with
the generators.
- The compatibility of the sensor unit and the
control PC must be checked on the
compatibility list, and the software program
must be installed or upgraded as required.
- To support a 2-tube configuration, the
timing must be adjusted with each of the
generators.
- - 4
Reference
Instruction
Manual
Instruction
Manual
The CXDI-C1
Service Manual
Instruction
Manual
The CXDI-C1
Service Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual