Canon CXDI-31 Service Manual page 65

7) By inputting
the serial number of sensor 1 in "A/D Board Serial Number for SensorID#1",
the serial number of sensor 2 in "A/D Board Serial Number for SensorID#2",
the serial number of sensor 3 in "A/D Board Serial Number for SensorID#3" and the
serial number of sensor 4 in "A/D Board Serial Number for SensorID#4",
it is possible to allocate the respective sensors to the sensor IDs displayed on the
operation unit.
Check that DEF has been selected as the "Fixed Defect Pixel, DEF or NO" setting.
@@@@@@@@ Capture Device Cofigration Table @@@@@@@@
Format Version [0 = 0x0] : 0
Max Capture Devices [4 = 0x4] : 4 .......................
@@@@@@@@ Capture Device Configration No.0 (SensorID#1 OPU)@@@@@@@@
------A/D Board Serial Number 0-0 -> 0x199
------A/D Board Serial Number 0-1 -> 0x2009
------A/D Board Serial Number 0-2 -> 0x123
------A/D Board Serial Number 0-3 -> 0x124
A/D Board Serial Number for SensorID#
R Capture Board Index
R A/D Board Index
R LANMIT Index
Custom Type[0:NO CUSTOM 1:STAND 2:TABLE 3:UNIV 4:CASSETTE] [0 = 0x0] : 0
White Average Min Limit
White Average Max Limit
White Diff Limit
Times Of The Standard Dev.
Fixed Defect Pixel, DEF or NO
2 Installation Manual
The Number of connected sensor units
[0x199 = 409] :
[0 = 0x0] : 0
[0 = 0x0] : 0
[0 = 0x0] : 0
[2000 = 0x7D0] : 2000
[3000 = 0xBB8] : 3000
[500 = 0x1F4] : 500
[10 = 0xA] : 10
[DEF] : DEF....................
:
:
:
- 39 -
.................. Serial No.
of sensor 1
Normally DEF