Canon CXDI-31 Service Manual page 7

CAUTION
Follow the safety instructions indicated below. Ignoring them may result in injury or accident.
1. Disassembly, Assembly, Adjustment and Maintenance
Disassembly, assembly, adjustment and maintenance must be done only by a service person
who has attended a service training designated by Canon.
2. Removal of Covers
Be sure to turn OFF the power of the instrument before removing the covers for maintenance
and repair. Also, do not touch the instrument with wet hands. Otherwise, you may get an
electric shock that may result in death or serious injury.
3. Fuse
When the fuse is going to be replaced, be sure to turn OFF the power of the instrument and
solve the problem which caused the fuse to blow. Be sure to replace the fuse with the
specified type only. Otherwise, fire or electric shock may result.
4. Ground Wire
Be sure to ground the instrument to an indoor grounded connector. Otherwise, fire or electric
shock may result due to leakage.
5. Modification
Never modify the product as it may result in fire or electric shock.
6. Waste control
The service provider is responsible for the disposal of used service parts, packing material, etc.
resulting from the setup, repair or maintenance of the medical device However, the customer
is responsible for the disposal of the medical device. Disposal activities must follow the
regulations (=specially controlled industrial waste) of the country where the device is used.