Caution During Operating - Canon CXDI-31 Service Manual

1. Caution during operating

Please pay attention to the following points when installing the machine.
(1) If the equipment is hoisted, lowered or transported, it must be supported at
both sides by a minimum of two people so there is no danger of it falling.
(2) If a forklift, etc. is used to transport the equipment, make sure there is nothing that could
impede the forklift on its route to the final destination.
(3) When installing the equipment, be sure the site meets the following criteria:
1) There must be no dripping water in the area.
2) The environment must be free of harmful elements, such as humid or acidic air, air
with a saline or sulfur content, where there is poor ventilation, or where air pressure
or temperature is abnormal.
3) The equipment must not be placed at an angle or subjected to vibration or shock (this
includes during transportation).
4) The equipment must not be kept where chemical products are stored or where gasses
are generated
5) The site's power supply must be of the correct voltage and frequency for the
equipment.
6) The site must be connected to a fully earthed cable with sufficient ground resistance
to meet standard values.
(4) After installation, be sure to dispose of waste product packaging with care and with full
respect for the environment.
(5) As the imaging unit is easily portable, take special care that it is not knocked, dropped or
subjected to strong shocks.
(6) Use clamps to secure any excess cable for the imaging unit.
2. Installation Manual
- - 2