Canon CXDI-31 Service Manual page 88

(28) -V filename
-V filename
This parameter dumps the transfer log.
Meaning * The parameter is used for analysis after the transfer software saves the
debugging character string displayed on the console to a file with a designated
filename.
It is used only when problems occur.
Description * This parameter does not affect DICOM data transfer.
(29) -I
-I
A-RELEASE-RES is ignored.
Meaning * This parameter is used simply as "-I"
Description * This is used when the error message [130012 Peer aborted Association (or never
connected)]occurs even though the DICOM data transfer was successful.
This is used based on the connected printers.
(30)-jn
-jn
This is the time to take timeout.
Meaning * Sets the time to take timeout in seconds.
Description * This parameter is to be changed when taking timeout.
(31) -k
-k
level = 0
1
2
* The -k option has been implemented to normalize DICOM headers
Meaning
Description
Note
The parameters -p, -v, and -V filename display the log on the console. Therefore, be sure to
always erase these parameters before operation by the user.
In the past, -k2 was used to fix troubles, but it has now been set as the default has been changed
to -k2 to ensure precise compliance with the DICOM code. At sites wishing to adhere to their
existing window values, -k1 should be used.
Level: 0:Do not delete DICOM tags. (Transfer all headers similar to storage.)
1:Delete Groups 0008, 0010, 0018, 0019 and 0020.
2:Delete Groups 0008, 0010, 0018, 0019, 0020 and Elements (0028,0030), (0028,1050),
(0028,1051), (0028,1052), (0028,1053), (0028,1054). Default
Note
In Ver.4.21, attach -k2 expressly to produce similar output. The previous option had -k1
as its default. The k option defaults to -k2, if k option is not specified.
Image Pixel Spacing (0028,0030)
Window Center (0028,1050)
Window Width (0028,1051)
Rescale Intercept (0028,1052)
Rescale slope (0028,1053)
Rescale Type (0028,1054)
For groups 0008, 0010, 0018, 0019, 0020, refer to DICOM manifesto.
2 Installation Manual
- 62 -