Canon CXDI-31 Service Manual page 77

C. Press the "SET" button, and input the parameters.
(Normally, the parameters need not be set. They must be input only when the need
arises.)
* A space must be input between each of the parameters.
D. After setting the output destinations, follow the procedure below to check whether images
can actually be transmitted. Return to the user menu, capture a sample image (one X-ray
image), and transmit the image to the printer and storage. There are two errors that may
result if the image cannot be transmitted:
a. "DICOM Connect Error. Cannot connect to the target. Check network or port number
setting. Retry?"
b. "DICOM Transfer Error. Error occurred during the association. Retry?"
Message a indicates that connection at the TCP/IP level is not possible and that the
physical connections or the subnet mask and other settings must be checked again.
Message b indicates that communication at the TCP/IP level is problem-free but that
DICOM level communication has failed. In this case, check again that AE_TITLE of
CXDI has been sent properly to the transmission destination and that the IP address, port
number and AE_TITLE of the transmission destination which are set with CXDI have
been set properly.
* Upper-case letters are used to input "AE_TITLE" of the transmission destination.
2 Installation Manual
[Fig 5]
- 51 -