Canon CXDI-31 Service Manual page 54

13) The DPRAM contents are displayed. Find the item shown below in this information, and
check the firmware versions.
Capture boot code version
A/D board boot code version
* Channels that are not connected to the sensor are displayed as "FFFF".
14) Once you finish checking, close HyperTerminal, shut down the control PC, and then
remove the capture board interface cable.
2 Installation Manual
CVR: 0101 200C 200F
SVR1: 0303 0002 0002
SVR2: 0405 0004 0004
SVR3: 0101 0009 0102
SVR4: FFFF FFFF FFFF
- 28 -
Caputure imaging code version
2449
0400 0006 0A80 0A80
0500 0002 08D0 0B30
0100 0013 0A80 0A80
FFFF FFFF FFFF FFFF
A/D board imaging code version