Canon CXDI-31 Service Manual page 31

No. Step
13 Inserting the backup
floppy disk
14 Calibration
15 Setting the Fixed ROI
Areas
16 Connections to the
network and setting the
output destination
17 Startup settings
18 Radiographic testing
19 Checking the linearity
of the transferred image
density
20 Operation unit gamma
correction
21 Body parts settings
22 Checking and
performing the system
settings
23 Anchoring
24 Deleting unnecessary
data
25 Cleaning
26 Explaining operation to
the user
27 Final parameter
adjustments
28 Backing up valuable
data
2. Installation Manual
Conditions and checkpoints
- It must be confirmed at re-start that backup
files have been made.
- No errors must be displayed.
This calibration must be performed with the
photo timer OFF
- If necessary, to set the ROI area.
- Radiography must be performed after
calibration.
- The images must be checked using charts
and phantoms.
- The data must be sent to the printer and
storage and the images must be checked.
- The engineer in charge must be consulted
prior to performing these settings.
- The engineer in charge must be consulted
prior to performing these settings.
- The engineer in charge must be consulted
prior to narrowing down the adjustments to
the final values.
Not necessary for the systems installed in
vehicles.
[Table.2]
- - 5
Reference
Instruction
Manual
Operation
Manual
Operation
Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual
Instruction
Manual
Operation
Manual
Operation
Manual
Instruction
Manual
The CXDI-C1
Service Manual
Operation
Manual
Operation
Manual
Instruction
Manual