Canon CXDI-31 Service Manual page 118

4) Changing the items below contained in the file allows you to change the settings for the
counter in the user screen.
ExpResult.ini file
[SystemCounter]
TotalStudy=
UsrStudyCounter=
UsrExposure=
[LastCounterReset]
StudyCounter=
ExpCounter=
[COUNTER 0]
TotalCount=
[COUNTER1]
TotalCount=
[COUNTER2]
TotalCount=
[COUNTER3]
TotalCount=
5) After overwriting the values, overwrite the file "ExpResult.ini" and save.
6) Close all windows that are open on the Desktop, and then start up the CXDI application.
7) Open the "System Information" screen, and check that the changed items have been set
correctly.[Fig 2]
"TOTAL IMAGES" indicates the total number of images obtained with all the
sensor.
2 Installation Manual
Screen Display
TOTAL STUDIES
STUDY COUNTER
IMAGE COUNTER
Year, month, day, hour, minute
Year, month, day, hour, minute
Total number of images obtained
with sensor unit 1.
Total number of images obtained
with sensor unit 2.
Total number of images obtained
with sensor unit 3.
Total number of images obtained
with sensor unit 4.
[Fig 2]
- 92 -
Note
Can be overwritten at the
user screen
Can be overwritten at the
user screen