Tightening Screws When Replacing Parts - Canon CXDI-31 Service Manual

3. CXDI-31 Imaging Unit
(4) Checking when installing the rear cover
Before installing the rear cover, make sure that there is nothing pinched or sandwiched between
the front cover and rear cover in the areas circled below.

3.1.4. Tightening screws when replacing parts

For the screw tightening torque for each parts replacement, refer to the following service
information and observe the instructions described there.
SIDR-09-006 Tightening Torque for Parts Replacement
- 11 -