Special Tools - Toro Greensmaster 3200 Service Manual

Special Tools

OTC (Owatonna Tool Company) supplies special tools
for servicing Toro Commercial Products. The TORO
SPECIAL TOOLS AND APPLICATIONS GUIDE shows
service tool applications.
Gauge Bar Assembly
Used to verify height–of–cut. Toro Part No. 13–8199.
Backlapping Brush Assembly – TOR299100
Used to apply lapping compound to cutting units while
keeping the operator's hands at a safe distance from the
rotating reel.
Bedknife Screw Tool – TOR510880
This screwdriver–type bit is made to fit Toro bedknife at-
taching screws. Use this bit with a torque wrench to se-
cure the bedknife to the bedbar.
DO NOT use and air or manual impact wrench with this
tool so damage to the bedbar will be prevented.
Greensmaster 3200/3200–D
Some tools may have been supplied with your mower or
available as TORO parts. Some tools may also be avail-
able from a local supplier.
Page 8 – 5
Figure 5
Figure 6
Figure 7
Cutting Units