UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Modules)
Figure 6-254 Installing mounting plates
Step 17 Install top covers.
Figure 6-255 Installing covers
----End
6.5.4 Installation in Top Air-Flow Configuration
●
●
6.5.4.1 Installing Cabinets
Installation on the Floor
Ensure that the installation floor is flat.
Step 1 Determine the positions for installing cabinets on the mounting surface based on
holes in the marking-off template.
Issue 05 (2021-10-13)
If the top air-flow cabinet is configured, installation against a wall is
supported.
The following procedure applies to installation against a wall. If cabinets are
not installed against a wall and there is operation space at the rear of the
cabinets, you need to install the cabinet combination screws at the rear and
the anchor screws at the bottom.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 Installation
232