Huawei UPS5000-H User Manual page 169

UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Modules)
Figure 6-124 Installing conversion copper bars
Step 2 Install equipotential ground cable for cabinets.
Figure 6-125 Installing equipotential ground cable for cabinets
Step 3 Install power cables between the UPS and the inductor cabinet.
● Cables have been preinstalled and bound in the inductor cabinet.
● The cables from the inductor cabinet to the UPS are configured based on the
● Cables must be bound to the nearest beam or cable bridge according to the
●
Issue 05 (2021-10-13)
NO TICE
longest cable length before delivery. If short cables are needed in the actual
installation scenario, you can cut the excess cables and crimp terminals.
route shown in the figure.
One power source
Copyright © Huawei Technologies Co., Ltd.
6 Installation
159